⚖️ Free Weight Converter
Gravel Weight Calculator — Cubic Yards to Tons
Convert cubic yards of gravel to tons, pounds, and kilograms instantly. Accurate density values for 8 material types. Essential for ordering and truck load planning.
✅ 8 Material Types ✅ Tons & Lbs ✅ Kilograms ✅ Truck Load Count ✅ Instant Results
Units:
Currency:
cu yd
Frequently Asked Questions
Click any question to expand the answer.
A cubic yard of standard bank-run gravel weighs approximately 1.4 tons (2,800 lbs). Crushed stone is heavier at 1.5 tons per cubic yard (3,000 lbs). Pea gravel is slightly lighter at 1.35 tons per cubic yard (2,700 lbs). Weight varies by material type, moisture content, and gradation — always verify with your supplier for precise delivery planning.
Multiply cubic yards by the material density in tons per cubic yard. For standard gravel: cubic yards × 1.4 = tons. For crushed stone: cubic yards × 1.5 = tons. For pea gravel: cubic yards × 1.35 = tons. Example: 5 cubic yards of crushed stone = 5 × 1.5 = 7.5 tons. Our gravel weight calculator does this automatically for all material types.
A standard dump truck carries 10–14 cubic yards or 12–20 tons of gravel, depending on the truck size and payload rating. A tandem axle truck holds about 10 cubic yards (14 tons of crushed stone). A tri-axle truck holds 12–14 cubic yards (18–21 tons). Always confirm the exact payload with your delivery company before scheduling.
Knowing gravel weight is essential for: (1) Confirming truck payload limits before delivery, (2) Getting accurate supplier quotes when material is sold by the ton rather than by the yard, (3) Structural calculations for driveways and base layers, (4) Ensuring your vehicle can safely transport bagged material. Use our calculator to instantly convert between cubic yards and tons for any gravel type.
Gravel costs $20–$50 per ton depending on material type and location. Crushed stone runs $30–$50 per ton. Pea gravel is $25–$45 per ton. Decomposed granite is $40–$70 per ton. Crushed limestone is $25–$40 per ton. Delivery typically adds $50–$150 per load. When comparing prices, convert everything to the same unit (tons or cubic yards) for accurate comparison.
Gravel Weight Reference Table — All Material Types
Gravel weight varies significantly by material type. The table below shows the density values used in our calculator. These are industry-standard averages — actual weight can vary ±10% with moisture content.
| Material | Tons / Cu Yd | Lbs / Cu Yd | Kg / Cu Yd |
|---|---|---|---|
| Crushed Stone #57 | 1.50 | 3,000 | 1,361 |
| Crushed Limestone | 1.45 | 2,900 | 1,316 |
| Bank-run Gravel | 1.40 | 2,800 | 1,270 |
| Pea Gravel | 1.35 | 2,700 | 1,225 |
| Decomposed Granite | 1.30 | 2,600 | 1,179 |
| Concrete / Mason Sand | 1.30 | 2,600 | 1,179 |
| Topsoil (dry) | 1.15 | 2,300 | 1,043 |
| Fill Dirt | 1.10 | 2,200 | 998 |
Cubic Yards to Tons — Quick Conversion Table
| Cubic Yards | Gravel (1.40) | Crushed Stone (1.50) | Pea Gravel (1.35) |
|---|---|---|---|
| 1 cu yd | 1.40 tons | 1.50 tons | 1.35 tons |
| 2 cu yd | 2.80 tons | 3.00 tons | 2.70 tons |
| 5 cu yd | 7.00 tons | 7.50 tons | 6.75 tons |
| 10 cu yd | 14.0 tons | 15.0 tons | 13.5 tons |
| 15 cu yd | 21.0 tons | 22.5 tons | 20.3 tons |
| 20 cu yd | 28.0 tons | 30.0 tons | 27.0 tons |
Need to calculate cubic yards from your project dimensions first? Use our main gravel calculator. For a full cost estimate, see the gravel cost calculator.